10 foot mobile DRAFTS UNIT

10′ Mobile DRAFTS UNIT
Capacity Gallons 1,500
Trailer Length 16-20′
Width 8′
Height 11″
Weight Empty lbs (approximate) 9,500
Weight Full lbs (approximate) 21,995

Bulkhead Connections

1 – 4” Draft Port with FDC fitting and a ball valve
1 – 4” x 2.5” Hydrant
1 – 2 ½” Fitting with ball valve
6 – Pipe Core Nozzle Mounts – assorted 1.5” & 2.5” by request*

Front Connections

1 – 2 ½” Fitting with ball valve
1 – 1 ½” Recirculation fitting with ball valve
1 – 4” Draft Port with FDC fitting and a ball valve
1 – 4” Supply side to Hydrant w/FDC fitting and a ball valve

Standard Features

  • Non-skid flooring in the pod and on the trailer rear deck – expanded and raised
  • Hinged access stairs with rail
  • Safety railing around rear deck
  • Floor drain – dump valve
  • Spray applied water-tight liner
  • Stainless Steel deflector shield
  • Exterior metal painted one color
  • 2-5/8″ ball hitch
  • 4 Corner jacks for support – each rated 8,000lb

Optional Items

  • Additional ports on Pump-Pod – 1.5” – 2.5” – 4” – 6” – Other?
  • Smooth siding with aluminum diamond plate trim – colors to suit
  • OS&Y Valves or other style
  • Siamese fitting(s)
  • Suction hose rack (Under trailer – 8’) for suction hose
  • Steel floor inside the tank portion
  • Tongue mounted storage compartment
  • Upgraded wheels
  • Interior and Exterior lighting to spec – 12V – LED
  • Swinging target mounted to deflector shield
  • Units can be easily customized and built to suit your Department/Agency needs
  • Drafting Riser – 4” (for NFPA testing at 6’ or 10’ above water line)
  • Internal Sprinkler heads – 2 sets of (2) or you specify
  • CAT – Diesel power pack and pump 1000 to 2400 GPM per your requirement
  • Mobile portable free standing Fire Hydrant

20′ Mobile DRAFTS UNIT
Capacity Gallons 3,400+
Trailer Length 24-28′
Width 8′
Height 15″
Weight Empty lbs (approximate) 20,800
Weight Full lbs (approximate) 49,100

Bulkhead Connections

1 – 6” Draft Port with FDC fitting and a ball valve
1 – 4” x 2.5” or 4.5” x 2.5” Hydrant
1 – 2 ½” Fitting with ball valve
6 – Pipe Core Nozzle Mounts – assorted 1.5” & 2.5” by request*

Front Connections

1 – 2 ½” Fitting with ball valve
1 – 1 ½” Recirculation fitting with ball valve
1 – 6” Draft Port with FDC fitting and a butterfly valve
1 – 6” Supply side to Hydrant w/FDC fitting and a butterfly valve

Standard Features

  • Sides to have (2) sliding windows with deflector shields for additional training access
  • Sides to have additional 6” ports with butterfly valves for drafting access
  • Non-skid flooring in the pod rear deck – expanded and raised
  • Floor drain – dump valve
  • Spray applied water-tight liner
  • Stainless Steel deflector shields
  • Exterior metal painted one color
  • Goose Neck or Pintel hitch
  • 6 Corner jacks for support – each rated 8,000lb

Optional Items

  • Additional ports on Pump-Pod – 1.5” – 2.5” – 4” – 6” – Other?
  • Smooth siding with aluminum diamond plate trim – colors to suit
  • OS&Y Valves or other style
  • Siamese fitting(s)
  • Suction hose rack (exterior) for suction hose
  • Steel floor inside the tank portion
  • Interior and Exterior lighting to spec – 12V – LED
  • Sprinkler heads and piping
  • Aerial target box – 12’ x 24’ roof mounted on unit for Truck & Ladder Testing/Training
  • Swinging target mounted to deflector shield
  • Units can be easily customized and built to suit your Department/Agency needs
  • Drafting Riser – 4” or 6″ (for NFPA testing requirements)
  • Internal Sprinkler heads – 3 sets of (2) or you specify
  • Electronic “totalizer” for pump testing and accurate flow rate verification
  • CAT – Diesel power pack and pump 1000 to 2400 GPM per your requirement
  • Mobile portable free standing Fire Hydrant

20′ Static DRAFTS UNIT
Capacity Gallons 3,400+
Length 20′
Width 8′
Height 12’6″
Weight Empty lbs (approximate) 10,800
Weight Full lbs (approximate) 39,100

Bulkhead Connections

1 – 6” Draft Port with FDC fitting and a ball valve
1 – 4” x 2.5” or 4.5” x 2.5” Hydrant
1 – 2 ½” Fitting with ball valve
6 – Pipe Core Nozzle Mounts – assorted 1.5” & 2.5” by request*

Front Connections

1 – 2 ½” Fitting with ball valve
1 – 1 ½” Recirculation fitting with ball valve
1 – 6” Draft Port with FDC fitting and a butterfly valve
1 – 6” Supply side to Hydrant w/FDC fitting and a butterfly valve

Standard Features

  • Sides to have (2) sliding windows with deflector shields for additional training access
  • Sides to have additional 6” ports with butterfly valves for drafting access
  • Non-skid flooring in the pod rear deck – expanded and raised
  • Floor drain – dump valve
  • Spray applied water-tight liner
  • Stainless Steel deflector shields
  • Exterior metal painted one color

Optional Items

  • Additional ports on Pump-Pod – 1.5” – 2.5” – 4” – 6” – Other?
  • Smooth siding with aluminum diamond plate trim – colors to suit
  • OS&Y Valves or other style
  • Additional Siamese fitting(s)
  • Suction hose rack (exterior) for suction hose
  • Steel floor inside the tank portion
  • Interior and Exterior lighting to spec – 12V – LED
  • Sprinkler heads and piping
  • Aerial target box – 12’ x 24’ roof mounted on unit for Truck & Ladder Testing/Training
  • Swinging target mounted to deflector shield
  • Units can be easily customized and built to suit your Department/Agency needs
  • Drafting Riser – 4” or 6″ (for NFPA testing requirements)
  • Internal Sprinkler heads – 3 sets of (2) or you specify
  • Electronic “totalizer” for pump testing and accurate flow rate verification
  • CAT – Diesel power pack and pump 1000 to 2400 GPM per your requirement
  • Mobile portable free standing Fire Hydrant

* Custom sizes also available. Your specifications can be met even if any your needs vary from the items listed above. Please contact us for a quote as most of these units are customized per department needs and requirements.