While the below specification is a default selection, custom sizes and options are available. Your needed specifications can be met, even if any of your needs vary from the items listed here. Please contact us for a quote as most of these units are customized to your individual department.
Mobile Pump Pod™ Unit
Hook it up, and you’re ready to go…
20’ Skid / Ground based Pump Pod™ Unit
For your main training site…
| Capacity Gallons | 1,500 |
| Trailer Length | 16-20′ |
| Width | 8′ |
| Height | 11′ |
| Weight Empty lbs (approximate) | 9,500 |
| Weight Full lbs (approximate) | 21,995 |
| Capacity Gallons | 3,400+ |
| Trailer Length | 20′ |
| Width | 8′ |
| Height | 12’6″ |
| Weight Empty lbs (approximate) | 10,800 |
| Weight Full lbs (approximate) | 39,100 |
Bulkhead Connections
6 – Pipe Core Nozzle Mounts – assorted 1.5” & 2.5” by request*
6 – Pipe Core Nozzle Mounts – assorted 1.5” & 2.5” by request*
Front Connections
1 – 1 ½” Water Supply Fitting with ball valve
1 – 6” Draft Port with FDC fitting and a ball valve incorporated with Drafting Riser
1 – 6” Expansion Drafting Port – capped.
1 – 6” Portable Hydrant w/FDC fitting to suit your needs
1 – 3 Port In-Line FDC connection (3 @ 2.5” Clappered Snoots)
1 – 1 ½” Water Supply Fitting with ball valve
1 – 6” Draft Port with FDC fitting and a ball valve incorporated with Drafting Riser
1 – 6” Expansion Drafting Port – capped.
1 – 6” Portable Hydrant w/FDC fitting to suit your needs
1 – 3 Port In-Line FDC connection (3 @ 2.5” Clappered Snoots)
Standard Features
- Rhino / Line X Coating in the pod and on the top of unit
- Fire Embossed Aluminum Diamond Plate Floor for front and rear decks
- Hinged access stairs with rail
- Safety railing around rear deck
- Interior Floor drain – 3” Ball / dump valve
- Galvanized Diffuser Screen / shield
- Exterior Vinyl Wrap to suit your artwork requirements (some limitations may apply)
- 2-5/8″ ball hitch or Pintle per your request
- 4 Corner jacks for support – each rated 8,000lb
- Front Deck mounted Storage Box
- Interior 1.5” Standpipe / Sprinkler Prop with resistance and Pressure Relief Valve
- 1.5” water fill with float ball shut off valve
- Rhino / Line X Coating in the pod and on the top of unit
- Fire Embossed Aluminum Diamond Plate Floor for front decks
- Interior Floor drain – 3” Ball / dump valve
- Galvanized Diffuser Screens / shields
- Exterior Vinyl Wrap to suit your artwork requirements (some limitations may apply)
- Front Deck mounted Storage Box
- Side opening “Window” with diffuser
- Interior 1.5” Standpipe /Sprinkler prop with resistance and Pressure Relief Valve
- 1.5” water fill with float ball shut off valve
Optional Items
- Additional ports on Pump Pod – 1.5” – 2.5” – 4” – 6” – Other?
- OS&Y Valves or other style
- Siamese fitting(s)
- Upgraded wheels
- Swinging target mounted to deflector shield
- CAT – Diesel power pack and pump 1000 to 2400 GPM per your requirement
- Additional Portable Training Fire Hydrant
- Water meter
- Heating Elements
- Additional ports on Pump Pod – 1.5” – 2.5” – 4” – 6” – Other?
- OS&Y Valves or other style
- Siamese fitting(s)
- Steel Corner wheels
- Swinging target mounted to deflector shields
- CAT – Diesel power pack and pump 1000 to 2400 GPM per your requirement
- Electric Pump – Typically 480v 3-phase with controller box & pressure switches
- Additional Portable Training Fire Hydrant
- Water meter
- Heating Elements